How to Get Your BBQ Charcoal Started Quickly

When it comes to starting your fire for cooking, there are several methods to get the job done. Fire starters, charcoal chimneys and even electric Charcoal Starter wands have all got their pros and cons. Let‚take a look at the best method for your next cook.

Note: We recommend all natural fire starters to protect the taste of your food.

Method 1: Fire Starters under charcoal

A super simple method requiring next to no equipment is just using 3-4 fire starters under a small pile of charcoal. Light the fire starters and place your charcoal directly above the fire starters, as the fire begins to catch gradually add more charcoal until you have the desired amount. This method takes around 20 minutes to complete.

Pros:

Very little equipment is needed
Simple and easy to do

Cons:

Much slower than other methods
More labour intensive

Method 2: A combination of a fire starters and a charcoal chimney

This method is again very simple, simply place 3-4 fire starters underneath a loaded charcoal chimney and wait until the charcoal completely catches. This method should light your charcoal in about 15-20 minutes. You will know your charcoal is ready when flame is shooting out the top.

Pros:

Easy and doesn't require much effort
Set and forget

Cons:

Still a 15-20 minute process

Method 3: Electric Charcoal Starter wand

The quickest and easiest way to light your charcoal is with an electric charcoal starter wand (CSW). Once you use one of these high-powered wands you will find it very hard to go back to using fire starters.

The device has two stages, stage one emits a high-powered heat to spark your charcoal, and once sparked put on the second stage which is a high-powered fan. This influx of oxygen will light your charcoal within 2-5 minutes. Making it the best option to cook multiple nights of the week.

Pros:

Quick 2-5 minute start time
Easy
No need to buy fire starters ever again

Cons:

The more expensive initial cost
Can't be left unattended due to power
Requires power 240v

Method 4: Charcoal Starter wand and chimney used together

Quite possibly our favourite method when lighting charcoal without fire starters is using the charcoal chimney and charcoal starter wand together.

Simply load your charcoal into the chimney, and then place the CSW into one of the purpose-cut holes for the CSW nozzle. The Flaming Coals chimney and wand were purposely designed to work together for the quickest lighting experience available.

This method will have you charcoal ready within minutes.

Pros:

Quickest option
No need to buy fire starters ever again
Set and forget

Cons:

Requires power 240v

As you can see, there are a variety of options when it comes to fire starters and fire starting methods. No option is better than another, it‚which option will suit you best and your circumstances. For example, you might use a CSW at home, but take fire starters out camping.

We hope this helps! Happy Cooking!

Check out our range of recipe blogs

Check out our range of firestarters accessories